Back to Setup Guides
CanonIntermediate

Canon imageRUNNER ADVANCE Setup Guide

Complete installation and configuration for Canon MFPs

45-60 minutes
6 steps
0 completed
Setup Progress0%

Setup Steps

Prerequisites

  • Network administrator credentials
  • Dedicated power outlet (20A recommended)
  • Static IP address or DHCP reservation
1

Unpacking and Physical Installation

Safely remove the copier from packaging and position in final location

15-20 minutes
Easy

Tasks

Inspect shipping container for damage
Remove all packing materials and protective tape
Remove transit locks and stabilizing bolts (check manual for locations)
Position copier in final location with proper clearance (12" on all sides)
Level the copier using adjustable feet
Install paper trays and output trays
Connect power cable (do not power on yet)
  • Use a dolly or furniture sliders for heavy units
  • Keep packaging materials until successful installation is verified
  • Ensure adequate ventilation around the unit
  • Position near network connection point to minimize cable runs
  • Keep user manual accessible for reference

Important Warnings

  • Never lift the copier by the scanner glass or document feeder
  • Copiers are heavy - always use 2+ people for moving
  • Ensure floor can support weight (check specifications)